It is mainly used for incidental piercing and secondary vacuum final sealing of pouch cell batteries
Brand:
ACEYItem No.:
ACEY-SVS200Compliance:
CE CertifiedWarranty:
One Year warranty with lifetime supportOrder(Moq):
1 setPayment:
L/C,T/T,Western Union, PaypalProduct Origin:
ChinaLead Time:
7daysPouch Battery Final Sealer Secondary Vacuum Sealing Machine
Description
Lithium Batteries Equipment Secondary Vacuum Sealing Machine for Polymer Cell after Electrolyte Filling, This equipment is used for lithium pouch cell vacuumizing and final heat sealing after filling & electrolyte diffusion process.
Features
*The head is made of copper material, which has good heat transfer effect, saves electricity consumption, improves work efficiency, and saves energy compared with similar products;
*The pressure of the upper and lower heads can be adjusted by the pressure regulating valve to meet the requirements of different process parameters;
*The upper and lower heads are driven by cylinders and guided by two linear guide sleeves, which can move up and down flexibly and accurately.
Ensure the parallelism requirements of the product after edge sealing;
*With automatic puncture function;
*The cover cavity is driven by an air cylinder and guided by a linear guide sleeve, which can move up and down flexibly, and the guidance is accurate to ensure the product tightness requirements;
*It can be applied to batteries of different specifications, and the adjustment is simple and convenient;
Specification
Vacuum degree
≤ -96Kpa (the buyer shall provide a vacuum pump)
Head temperature
room temperature~250℃, temperature adjustable;
Temperature control accuracy
±1.5℃;
Heat sealing pressure
0~7Kg/cm 2 adjustable;
Heat sealing time
0~99 seconds adjustable;
Edge banding width
5±0.4mm (according to customer requirements);
Edge sealing size
200mm;
The range of the battery
200 long and 120mm wide
Seal thickness range
60 ~ 300um
Seal thickness accuracy (mm)
package thickness difference between any two points <15um
Gas consumption
about 0.2L compressed gas/each time.
Pneumatic working speed
≥180 times/h
Power
Using 300w heating tube, the power consumption when heating is about 0.6KW.
Compressed air source
0.5~0.7Mpa;
Dimensions
Working part: L510mm*W510mm*H710mm;
Power supply
220V/50Hz;
Weight
about 70KG
Product Display
Packing
One-stop Solution