XIAMEN ACEY NEW ENERGY TECHNOLOGY CO., LTD.
This equipment is mainly used for the production of small-scale production of lithium battery pole pieces in the laboratory.
Brand:
ACEYItem No.:
ACEY-AC135Compliance:
CE CertifiedWarranty:
One Year warranty with lifetime supportOrder(Moq):
1 setPayment:
L/C,T/T,Western Union, PaypalProduct Origin:
ChinaLead Time:
7daysLaboratory small lithium battery electrode sheet coating machine
Description
This process can replace the original manual squeegee and oven drying operations, and improve the uniformity of squeegee and drying efficiency. It is the best equipment used in school, the material factory, laboratory etc.
Specification
1)Coating speed：0.5m/min Continuously adjustable (mechanical running speed 0～1.5m/min)；
2) Furnace temperature: adjustable from room temperature to 150°C, with hot air circulation;
3) Pole piece width: ≤300mm;
4) Coating roll circle runout ±0.001
5) Coating accuracy: ≤±0.02mm;
6) Pasting method: knife type method, single side continuous;
7) Applicable base tape: copper foil, aluminum foil, etc.;
8) Heating zone: one zone, 1.2 meters;
9) Rewinding adopts automatic correction system, correction control accuracy is ±0.2mm,
10) Power supply voltage: 380V three-phase power supply;
11) Compressed air: pressure 0.5Mpa~0.7Mpa, flow rate: 0.04M3/min;
12) Power consumption: 6.5KW; exhaust power: 60W
Dimensions: length×width×height=1800×1020×1300;
Product Display
Lab Automatic Lithium Battery Electrode Coater Film Coating Machine
This film coating machine is mainly used for raw material of lithium battery electrode coating，the coating width can be adjust and built-in vacuum pump.
Automatic Film Drying Coating Machine With Built-in Vacuum Pump
Battery electrode coating machine is a touch-screen film coater which widely used in all kinds of high- temperature film coating research.
250mm Width Battery Electrode Coating Machine With Heat Function
This Heating flat film coating machine can be used for researchers on ceramic tape castings and Li-Ion battery electrode coating. Heating cover with digital temperature controller can dry films after coating up to 130°C with a temperature accuracy of +/-1°C.
Automatic Battery Film Coating Machine With Dying Cover
It is an ideal tool for low-cost research and development of battery electrode materials.
Battery Electrode Continuous and Intermittent Experimental Transfer Coating Machine
The continuous and intermittent experimental coater is a three-roll transfer coating equipment
Large Lithium Battery Electrode Three-roll Transfer Coating Equipment
This equipment is designed to be convenient for researchers to use, and to meet the requirements of coating accuracy and consistency, which is no different from production.
30V 40A Charge 40A Discharge Li Ion Battery Aging Test Machine
ACEY-BA3040-20 battery aging machine is used to test the lifespan, reliability, capacity and other parameters of the battery pack through cyclic charge and discharge test.
1500W-6000W Automatic Fiber Laser Welding Machine For Lithium Battery Pack Busbar Welding
ACEY-LWM series laser welding machine is mainly used for welding copper, aluminum, iron, nickel or their alloy metals, especially suitable for prismatic battery pack aluminum busbar or nickel transfer connection welding process.
703, 7F, Zhonghengji Building, No.223, Qishan North Road, Huli District, Xiamen, Fujian, China
Email : allen@xmacey.com
Tel : +8618950009155
Whatsapp : +8618950009155
