Laboratory small lithium battery electrode sheet coating machine

Laboratory small lithium battery electrode sheet coating machine

Description

This process can replace the original manual squeegee and oven drying operations, and improve the uniformity of squeegee and drying efficiency. It is the best equipment used in school, the material factory, laboratory etc.

Specification

1)Coating speed：0.5m/min Continuously adjustable (mechanical running speed 0～1.5m/min)；

2) Furnace temperature: adjustable from room temperature to 150°C, with hot air circulation;  

3) Pole piece width: ≤300mm;

4) Coating roll circle runout ±0.001

5) Coating accuracy: ≤±0.02mm;

6) Pasting method: knife type method, single side continuous;          

7) Applicable base tape: copper foil, aluminum foil, etc.;

8) Heating zone: one zone, 1.2 meters;

9) Rewinding adopts automatic correction system, correction control accuracy is ±0.2mm,

10) Power supply voltage: 380V three-phase power supply;

11) Compressed air: pressure 0.5Mpa~0.7Mpa, flow rate: 0.04M3/min;

12) Power consumption: 6.5KW; exhaust power: 60W    

Dimensions: length×width×height=1800×1020×1300;

Product Display