5V 1000A 2 Channels Lead-acid Lithium Ion Battery Capacity Tester

ACEY-HRCDS-5V1000A-2CH battery charge discharge capacity tester is mainly used for circle life testing and quality control of li-ion battery, lead-acid battery, Ni-Cd battery, NiMH battery and so on in production line or in lab.

Brand:
ACEY
Item No.:
ACEY-HRCDS-5V1000A-2CH
Compliance:
CE Certified
Warranty:
One Year warranty with lifetime support
Order(Moq):
1 Set
Payment:
T/T
Product Origin:
China
Lead Time:
7days

INQUIRE now

Product Catalog

New Products

Product Detail

5V 1000A 2 Channels Lead-acid Lithium Ion Battery Capacity Tester

Equipment configuration list

No.	Category	Product name	Product model	Quantity	Remarks
1	Test equipment	Charge and discharge test equipment	ACEY-HRCDS-5V1000A	2CH
2	Cabinet	Charging and discharging equipment cabinet	/	1PCS	Default without power input line
3	Computer	Computer	Dell computer I5-10500 processor /16G memory / 256G solid state + 1T hard disk / 3 network port	1PCS	Optional,including mouse, keyboard and 19 inch AOC displayer
4	Accessories	Charge discharge test line	/	2PCS	Each channel has a set of test lines with a length of 3.5meters.(including fixture)
5	Accessories	Switch	TP-LINK TL-SF1008VE	1PCS
6	Accessories	Communication accessories	Communication line / Crystal head, etc	Several	For communication
7	Accessories	USB Flash Drive	16G	1PCS	Contains Test software etc.
8	Accessories	File	/	1PCS	Test report, packing list, etc

Application and Function

Application: This battery charge discharge capacity tester is mainly used for circle life testing and quality control of li-ion battery, lead-acid battery, Ni-Cd battery, NiMH battery and so on in production line or in lab.
Support battery circle life testing, capacity testing, charging characteristic testing, discharging characteristic testing, charge retention capability testing, charge and discharge efficiency testing, over charge or over discharge rate affordability testing.

Working Environment and Technical Parameters

Stand alone power supply: AC 220V±10%, frequency: 50HZ±5%.
Power supply of the whole cabinet: AC 380V±10%, frequency: 50HZ±5%.
Maximum input power of the whole cabinet: 14.3 kW (2CH)
Working temperature: 0℃~ 45℃.
Humidity: less than ≤ 85%R.H (non-condensing).
No severe shake, no corrosive gases, no flammable or explosive gases around.
Resolution: AD 16 bit.

Parameters

No.	Item		ACEY-BP24-50A120A
1	Main channels		1CH/ module
2	Channel working mode		Completely independent.
3	Main channel working mode		Charge: CC, CV, CCCV, no voltage or current impact when CC transfer to CV.
			Discharge: CD, CP, CR, DCCV.
			Still, Pulse test, Working Condition test, DCIR test.
	Main channel test cutoff condition		Time, total voltage, total current, capacity, -ΔV, Vcell, RSOC, etc.
4	Main channel Voltage	Single channel test range	0V-5V
		Min. discharge voltage	1V
		Accuracy	±0.05%FS+0.05%RD
		Resolution	0.1mV
	Main channel Current	Single channel test range	±1000A
		Min. output current	500mA
		Accuracy	±0.05%FS+0.05%RD
		Resolution	1mA
		Current start response time	＜20ms(10%FS~90%FS)
	Time	Resolution	10mS
	Auxiliary temperature (Optional)	Range	﹣20℃～100℃
		Accuracy	±1℃（0℃～70℃）
		Resolution	0.1℃
	Power	Output power	Single channel continuous working power 5000W
		Stability	±0.1%FS+0.1%RD
5	Communication		LAN
6	Control program		Support data protection when power off, continue testing caused of power cutoff or manually stop and revise step parameter online.
			Users can set protection condition, include minimum voltage, maximum voltage, minimum current, maximum current, etc.
			Users can set auxiliary channel protection condition, including minimum voltage, maximum voltage, maximum temperature, minimum temperature.
			Cycle time	Max. 9999
			Programmable step	Max. 9999
			Nested loop	Max. 10 layers
			Step time range	No limit, support h, min, s
			Data record	Time≥10ms,Voltage≥0.05%FS+0.05%RD,Current≥0.05%FS+0.05%RD
			Program feature	Each step has one or multiple exit
7	Data display		Cycle list	Circulation number. Charge/discharge capacity, efficiency, power and average voltage, etc.
			Process list	Process number, working mode, process time, capacity, power, DIR, medium voltage, cut-off voltage, cut-off current, etc.
			Detail list	Record number, system time, cumulative time, voltage, current, energy, power, cell temperature, etc.
8	Data export		Data can be exported as EXCEL, TXT or diagram. Provide charge discharge efficiency, charge discharge curve, voltage, capacity, current-time characteristic curves, etc.
9	Data saving		Save as files
10	Curves type		X-coordinate: total time, charge discharge capacity, cycle time, voltage, current, capacity.
			Y-coordinate: total voltage, current, capacity, power, cell temperature(Optional), end of charge and discharge capacity, etc.
11	Software protection		Power off data protection, power resume continue testing, OVP, ODP, OCP, UCP, OTP, capacity protection, abnormal voltage trend protection, abnormal current trend protection, abnormal current fluctuation protection, abnormal voltage fluctuation protection, abnormal charging voltage increase rate protection, abnormal discharge current decrease rate protection.
	Hardware protection		Power off, open circuit and short circuit protection. Reverse or wrong connection protection, OCP, OVP, OTP, fixture contact abnormal protection.
	Warning function		Switch off automatically under emergency, shutdown when power off, load connect and disconnect automatically.
12	Barcode scan		Support barcode start and binding test data, classify batteries rapidly and accurately. Support detailed battery database management functions, connect battery information with testing data base, which is easy for management of data base system.
13	Sampling terminals		Four-polar sampling. Copper nose or other fixture.
14	Energy consumption		Discharge power feedback to grid
15	Cooling method		Forced Fan-cooled
	Noise		Less than 70dB
	IP grade		IP20
16	Repair		Modularized structure. Can be replaced or repair with spare parts.

Advantages

High reliability, low noise, high energy density, convenient for flexible use in the laboratory. (Single module 220V power supply).
Power feedback to grid with direct current bus efficiency ≥70%: Both charging and discharging is energy-saving which saves a lot of electric power expenses and air-conditioner fees.
Fixture contact impedance monitoring to avoid unsafe problems caused by poor terminal contact or long terminal application time oxidation.
CCCV charge: CC charge transfer to CV charge smoothly, without any impact, which can avoid the micro-shot circuit due to high temperature of peak current impact or to avoid PCB protection or second protection action caused by over-charging.
Current and voltage sampling is of high stability and accuracy: this equipment applied 16bit bipolar ADC/DAC unit, to ensure voltage sampling high accuracy and long-term stability.
DL dynamic load protection function: effectively protect the battery during charging and discharging, prevent the battery from sparking and effectively avoid the current shock caused by the loose connector, and effectively protect the electronic components of the battery from being damaged by the impulse current, such as MOSFET, FUSE.
Voltage clamp function: when battery does protect action through charging process, voltage clamp to pre-set voltage can protect battery or PCB from damage.
ECD & EVD protection: it can avoid and select the battery that causes active protection and stops charging or discharging in advance due to unqualified conditions.
The software has rich functions, integrating functions such as "working condition simulation test", "charge and discharge test", and cooperating with a professional data analysis software platform, it can assist in the research and development of test links to quickly analyze data. Working condition simulation test supports the import of working condition files (Excel format, time current, time power mode) to realize millisecond test verification.
Support the third-party equipment control, control the temperature box and other equipment during the test, and save the relevant tests together to meet the battery test requirements (Optional, the third party provides the relevant protocols)
Capacity calibration function: specify the discharge capacity of a step test as the benchmark for various cycle tests.
Support RSOC capacity recharge test: specify the charge / discharge capacity of the previous cycle test as the benchmark (or the cumulative capacity of the previous steps), and set it with the capacity judgment conditions of the next step.
Cumulative capacity SOC function (AH calculator): calculate the current cumulative capacity in real time according to the preset cell capacity as the judgment condition of the work step.
Single channel automatic export Excel data table: you can define the relevant time node/export path, and automatically export the corresponding channel Excel file.
Data statistics function: including online data statistics and historical data statistics.
Customize and export Excel data content according to requirements