Xiamen Acey New Energy Technology Co.,Ltd
![$this->product_detail['product_name']](/uploadfile/category/74bf9a88787562fffe07221918c9bf86.jpg)
Split-able test cell is designed for R&D of rechargeable battery materials by testing three electrodes.
Brand:
ACEYItem No.:
ACEY-E200Compliance:
CE CertifiedWarranty:
One Year warranty with lifetime supportOrder(Moq):
1 setPayment:
L/C,T/T,Western Union, PaypalProduct Origin:
ChinaLead Time:
7daysThree-Electrode Split Test Cell For Lab Research
Description
It is designed to test various electrodes easily and quickly by providing the user with a structure to simulate assembled coin cells without the need to crimp actual coin cell cases. Two sides of the test cell connect to both electrode (the anode and cathode), with the middle being connected to the reference electrode which can be used for monitoring voltage variations of the two electrodes. This test cell can accept 15 mm diameter electrodes and 24mm separators.
Features
The top of the form
1.Seal the top of the form with an O-ring seal
2.Adopt O - ring seal
The top of the form
(2) Import seal ring, high temperature resistance 230 degrees
Form the bottom of the
The top of the form
(3) can be adjusted by the spring tension, adapt to various thickness of the electrode
(4) Easy to install before the test, easy to disassemble after the test, simulation button battery assembly structure, convenient and fast assembly, test various electrodes. Can be placed in high and low temperature box test, -10℃~100℃
Good repeatability
(5) Small volume, put into the glove box convenient
(6) Can be placed in high and low temperature box test, -10℃~100℃
(7) Good repeatability
Specification
Main size
58mm*50mm in diameter (excluding the side lantern plug)
Net weight
about 524g (full weight, including spare parts: 532.5g)
Pole plate diameter
16mm
Material
SUS316
One-stop Solution
Laboratory Coin Cell Assembly Equipment Battery Pilot Line
Coin cell lab equipment mainly include the vacuum mixer, manual film coating machine, electrode roller press machine,electrode cutter and crimping machine for coin cell sealing. All the equipment suitable for all kinds of coin cells, such as CR2016, CR2025, CR2032, CR2430 and so on. Coin cell research is the most convenient way for powder materials analysis.
Small 0.5L Magnetic De-ironing Filtration System for Battery Electrode Slurry
This filter device is mainly applied to a special filter designed for laboratory samples to filter out various hard particles with a particle size of not less than 124 microns in the slurry. The whole machine has beautiful design and is flexible and convenient to use.
Low Noise 150ML 250ML Vacuum Mixer For Lab Research
This battery slurry vacuum filter is mainly used for Nano grade slurry for laboratory, with portable design, flexible and convenience use.
Adjustable Lab Vacuum Coating Machine For 18650 Battery Electrode Coating
ACEY-FC250 with vacuum chuck designed to produce films with consistent thickness by using micrometer adjustable applicators or fixed thickness applicators
100mm Width Adjustable Laboratory Battery Coating Device Film Applicator
Adjustable Film Applicator - This unique wet film applicator features micrometer heads for knife blade adjustment.
80mm Width Lab Four Side Wet Film Applicator(80µm,85µm,90µm,95µm)
Widely used in various coating researches, such as battery material film, ceramic film, crystal film, special nano film
Manual Rolling Press Machine For Lithium Battery Electrode Sheet Calendering
It is mainly suitable for manual rolling of battery materials in the laboratory.
Lab Vertical Electric Roll Press Machine For 18650 Battery Electrode Calendering
This lab roll press machine can adjusting thickness of the Li-Ion batteries electrode after coating and drying.
703, 7F, Zhonghengji Building, No.223, Qishan North Road, Huli District, Xiamen, Fujian, China
Email : allen@xmacey.com
Skype : tangrutian
Tel : +8618950009155
Whatsapp : +8618950009155
