Xiamen Acey New Energy Technology Co.,Ltd
Non-graphitized hard carbon is also the anode electrode material for power lithium-ion batteries.
Brand:
ACEYItem No.:
A-HCCompliance:
CE CertifiedWarranty:
One Year warranty with lifetime supportOrder(Moq):
1 KilogramPayment:
L/C,T/T,Western Union, PaypalProduct Origin:
ChinaLead Time:
7daysSodium ion Hard Carbon Battery Negative Electrode Raw Materials
Description
Low or non-graphitized hard carbon is also the negative electrode material of power lithium-ion batteries. The hard carbon structure is stable and the charge and discharge cycle life is long. The potential of carbon lithium can be higher than 0.2V, and the safety performance is better.
Specification
Item
Unit
Analysis Result
Method
Particle Size
D10
μm
4.9
Laser diffraction method: The particle size analyzer of the
British Malvin2000
D50
μm
7.9
D90
μm
12.7
Dmax
μm
21.1
Tap Density
g/cm3
1.01
FZS4-4B type automatic tap density meter. Beijing iron and Steel
Research Institute.
Reversible Capacity
mAh/g
250
Land test device from Wuhan
Lithium Battery Anode Material Li4Ti5O12 LTO Powder
It is mainly used in energy storage battery, EV battery, special power supply, super capacitor and so on.
Battery Anode Material Mesocarbon Microbeads Graphite MCMB Powder
High Performance Artificial Graphite MCMB is mainly used for Lithium Battery Anode Material in Laboratory.
Pneumatic Single Side Automatic Spot Welding Machine For Battery Pack Assembly
ACEY-S200A can be matched with the production line of lithium battery group,suitable for battery pack spot welding and assembly in the factory for 14500/18650/21700/26650/32650/32700 multi-parallel multi-series combination
5V6A 12A Battery Testing Machine Polymer Clamps for Pouch Cell
Pouch cell polymer clamp is the connection between pouch cell and pouch cell testing machine
Temperature control Lithium Battery Short Circuit Testing Equipment
This series of equipment is one of the commonly used equipment in all kinds of baking, aging and high temperature experiments.
85V 10A Charge 20A Discharge Life Cycle Tester For Lithium Battery Pack
ACEY-BT8520-7 is mainly used for testing the charging and discharging cycle of finished lithium batteries.The equipment has four test steps: charging, discharging, shelving and cycling. By editing the corresponding step, the battery can be tested according to the set process.
3s-28s 72V 80A Lifepo4 Bms Battery Management System For Electric Bicycles
【ACEY-HP28SA】3-28 strings Lifepo4 Battery Management System With Balance For Electric Bicycles, Electric Motorcycles And Other Products.
620L 10℃-300℃ 4 Layers Heating Drying Oven For Battery Production Line
This Drying oven can be used for lithium battery industry production process of vacuum drying equipment, the temperature, vacuum degree, the size of the studio and the barrier height is maximally meet the needs of the lithium battery industry.
703, 7F, Zhonghengji Building, No.223, Qishan North Road, Huli District, Xiamen, Fujian, China
Email : allen@xmacey.com
Skype : tangrutian
Tel : +8618950009155
Whatsapp : +8618950009155
