XIAMEN ACEY NEW ENERGY TECHNOLOGY CO., LTD.
![$this->product_detail['product_name']](/uploadfile/category/d29808239dd7677a1415cfbfa4906a69.jpg)
Brand:
ACEYItem No.:
ACEY-HRCDS-5V400A-1CHCompliance:
CE CertifiedWarranty:
One-year warranty with lifetime supportOrder(Moq):
1 SetPayment:
T/TProduct Origin:
ChinaLead Time:
7-35 days5V 400A Lithium Ion Battery Cell Life Cycle Tester (Energy Feedback Type)
Application
ACEY-HRCDS-5V400A-1CH battery life cycle tester has the characteristics of high reliability, low noise and high energy density. It adopts a single-module 220V power supply, which is convenient for flexible use in the laboratory, supports energy feedback to the power grid, and has a DC bus efficiency of ≥70%. The charging and discharging process is highly efficient and energy-saving, which can greatly reduce electricity bills and reduce air conditioning heat dissipation energy consumption.Test Project
Working Environment
Parameters
| No. | Item | ACEY-HRCDS-5V400A | ||
| 1 | Main channels | 1CH/ module | ||
| 2 | Channel working mode | Completely independent. | ||
| 3 | Main channel working mode | Charge: CC, CV, CCCV, no voltage or current impact when CC transfer to CV. | ||
| Discharge: CD, CP, CR, DCCV. | ||||
| Still, Pulse test, Working Condition test, DCIR test. | ||||
| Main channel test cutoff condition | Time, total voltage, total current, capacity, -ΔV, Vcell, RSOC, etc. | |||
| 4 | Main channel Voltage | Single channel test range | 0V-5V | |
| Min. discharge voltage | 1V | |||
| Accuracy | ±0.05%FS | |||
| Resolution | 0.1mV | |||
| Main channel Current | Single channel test range | ±400A | ||
| Min. output current | 500mA | |||
| Accuracy | ±0.05%FS | |||
| Resolution | 1mA | |||
| Current start response time | ＜10ms(10%FS~90%FS) | |||
| Time | Resolution | 10mS | ||
| Auxiliary temperature (Optional) | Range | ﹣20℃～100℃ | ||
| Accuracy | ±1℃（0℃～70℃） | |||
| Resolution | 0.1℃ | |||
| Power | Output power | Single channel continuous working power 2500W | ||
| Stability | ±0.1%FS | |||
| 5 | Communication | LAN | ||
| 6 | Control program | Support data protection when power off, continue testing caused of power cutoff or manually stop and revise step parameter online. | ||
| Users can set protection condition, include minimum voltage, maximum voltage, minimum current, maximum current, etc. | ||||
| Users can set auxiliary channel protection condition, including minimum voltage, maximum voltage, maximum temperature, minimum temperature. | ||||
| Cycle time | Max. 9999 | |||
| Programmable step | Max. 9999 | |||
| Nested loop | Max. 10 layers | |||
| Step time range | No limit, support h, min, s | |||
| Data record | Time≥10ms,Voltage≥0.05%FS,Current≥0.05%FS | |||
| Program feature | Each step has one or multiple exit | |||
| 7 | Data display | Cycle list | Circulation number. Charge/discharge capacity, efficiency, power and average voltage, etc. | |
| Process list | Process number, working mode, process time, capacity, power, DIR, medium voltage, cut-off voltage, cut-off current, etc. | |||
| Detail list | Record number, system time, cumulative time, voltage, current, energy, power, cell temperature, etc. | |||
| 8 | Data export | Data can be exported as EXCEL, TXT or diagram. Provide charge discharge efficiency, charge discharge curve, voltage, capacity, current-time characteristic curves, etc. | ||
| 9 | Data saving | Save as files | ||
| 10 | Curves type | X-coordinate: total time, charge discharge capacity, cycle time, voltage, current, capacity. | ||
| Y-coordinate: total voltage, current, capacity, power, cell temperature(Optional), end of charge and discharge capacity, etc. | ||||
| 11 | Software protection | Power off data protection, power resume continue testing, OVP, ODP, OCP, UCP, OTP, capacity protection, abnormal voltage trend protection, abnormal current trend protection, abnormal current fluctuation protection, abnormal voltage fluctuation protection, abnormal charging voltage increase rate protection, abnormal discharge current decrease rate protection. | ||
| Hardware protection | Power off, open circuit and short circuit protection. Reverse or wrong connection protection, OCP, OVP, OTP, fixture contact abnormal protection. | |||
| Warning function | Switch off automatically under emergency, shutdown when power off, load connect and disconnect automatically. | |||
| 12 | Barcode scan | Support barcode start and binding test data, classify batteries rapidly and accurately. Support detailed battery database management functions, connect battery information with testing data base, which is easy for management of data base system. | ||
| 13 | Sampling terminals | Four-polar sampling. Copper nose or other fixture. | ||
| 14 | Energy consumption | Discharge power feedback to grid | ||
| 15 | Cooling method | Forced Fan-cooled | ||
| Noise | Less than 70dB | |||
| IP grade | IP20 | |||
| 16 | Repair | Modularized structure. Can be replaced or repair with spare parts. | ||
Equipment Specification
| Cabinet size | 600*845*1030mm |
| Weight | ≤250KG |
| Channels number | 4CH |
| Remarks :The above picture is for reference only, subject to the kind! | |
Product Display
512 Channels 256 Channels Multi-channels Lithium Ion Cylindrical cell Battery Capacity Tester 5V3A 6A 10A
Different channels can be customized according to customer requirements, and the current and voltage are unified, its suitable for mass production.
5V 1A 512-Channel Lithium Battery Cell Tester For Polymer Battery Capacity Test
Battery Testing Equipment is a popular newly developed battery testing system for Li-ion cells.
5V10A 5V20A 5V30A Lithium ion Prismatic Cell Capacity Tester
128 256 512 Channel High Current Lithium Ion cell Battery Capacity Tester
5V 6A 8 Channel Lithium Ion Battery Tester For Battery Cell Testing
Battery tester equipment is an eight-channel battery analyzer to analyze polymer battery and cylindrical batteries
Cylindrical Lithium ion Battery Cell Testing Machine For Charge Discharge Capacity Analyzer
The High-precision battery testing equipment is mainly designed for power batteries
5V20A 30A 60A 100A High Current Energy Feedback Battery Testing Equipment
The equipment has the characteristics of high power, high precision and high performance.
Lithium ion Battery Charge-discharge Cycle Life Testing Equipment With Different Clamps
Suitable for lithium ion battery charging and discharging testing.
5V 10MA 20MA 50MA Lithium Battery Button Coin Cell Capacity DCIR Tester Cycler Analysis Device
ACEY provides different specifications of lithium battery coin cell capacity testers.
703, 7F, Zhonghengji Building, No.223, Qishan North Road, Huli District, Xiamen, Fujian, China
Email : allen@xmacey.com
Tel : +8618950009155
Whatsapp : +8618950009155
