ACEY-MP30S001 It is specially designed for energy storage, electric motorcycles, electric tricycles, low-speed vehicles, etc.24S Product protection board scheme is suitable for lithium batteries with different chemical properties, such as lithium ion, lithium polymer, lithium iron phosphate, etc. The protective plate has strong load capacity and continues to discharge electricity Stream up to 200A.
Brand:
ACEYItem No.:
ACEY-MP30S001Compliance:
CE CertifiedWarranty:
One Year warranty with lifetime supportOrder(Moq):
Payment:
T/TProduct Origin:
ChinaLead Time:
7days3S-24S 12V 48V 72V 200A EV Bms For Lithium Ion Battery
Product Introduction
ACEY-MP30S001 It is specially designed for energy storage, electric motorcycles, electric tricycles, low-speed vehicles, etc.24S Product protection board scheme is suitable for lithium batteries with different chemical properties, such as lithium ion, lithium polymer, lithium iron phosphate, etc. The protective plate has strong load capacity and continues to discharge electricity Stream up to200A.
Features
1)support 24 Serial cell protection;
2) Integrated hardware protection functions such as overvoltage, undervoltage, charging overcurrent, discharging overcurrent, and short circuit.
3) Support weak current switch to control charging and discharging;
4) reserved for charging low temperature protection function (not used).
5)Balancing
Basic parameters
Cell Specifications | 24 strings of iron lithium battery pack |
Interface Type | Charge and discharge at the same port |
Recommended charging voltage | 86.4V |
Operating voltage range | 55.2V~92.4V |
Continuous charge current | ≤200A |
Continuous discharge current | ≤200A |
Running power consumpt | ≤ion80uA |
Sleep power consumption | / |
Protection board internal resistance | the charge and discharge MOS in the board are turned on, the internal resistance from B- solder joint to output solder joint is less than or equal to 10mR |
Operating temperature | - 30℃~75℃ |
Protective plate size | 160±0.5mm * 116±0.5mm * 25±2mm (length*width*height) |
Note:The test needs to be carried out in a room with a temperature of 25±2°C and a relative humidity of 65 +/- 20 %
Main parameters
Features
Specification
unit
project
minimum
Typical value
maximum value
Single Overvoltage Protection
Overvoltage Protection Voltage
3.8
3.85
3.9
V
Overcharge protection delay time
500
1000
1500
mS
Overcharge protection recovery voltage
3.6
3.65
3.7
V
Monomer overdischarge protection
Over discharge protection voltage
2.2
2.3
2.4
V
Over-discharge protection delay time
500
1000
1500
mS
Over-discharge protection recovery voltage
2.4
2.5
2.6
V
Over-discharge protection recovery conditions
disconnect the load
Charge overcurrent protection
Charge overcurrent protection value
-
-
-
A
Charge overcurrent delay
-
-
-
mS
Charge Overcurrent Release Condition
-
Discharge overcurrent protection
Primary discharge overcurrent protection current
1200
1500
1800
A
Primary discharge overcurrent1protection delay
50
100
150
mS
Secondary discharge overcurrent protection current value
-
-
-
A
Secondary discharge overcurrent2protection delay
-
-
-
mS
Discharge overcurrent protection recovery condition
Disconnect the load or charge
Short circuit protection circuit
-
3000
4000
A
Short circuit protection delay time
-
300
600
uS
Short circuit protection recovery
disconnect the load
Short circuit protection
Short circuit description
The short circuit current is less than the minimum value or above the maximum value may cause the short-circuit protection to fail, short-circuit current exceeds 4400A, short-circuit protection is not guaranteed,nor short circuit protection testing is not recommended.
Discharge high temperature protectio
n temperature protection value
70
75
80
°C
(external)
Temperature protection release value
43
53
63
°C
Discharge low temperature protection
temperature protection value
-
-
-
°C
(external)
Temperature protection release value
-
-
-
°C
Charging high temperature protection
temperature protection value
70
75
80
°C
(external)
Temperature protection release value
43
53
63
°C
Charging low temperature protection
temperature protection value
-
-
-
°C
(external)
Temperature protection release value
-
-
-
°C
FETCharge and discharge high temperature
temperature protection value
80
85
90
°C
Protection (built-in)
Temperature protection release value
45
60
75
°C
Equalization function
Turn-on voltage
3.55
3.6
3.65
V
Open differential pressure
-
-
-
V
Balance current
52
72
92
mA
Balanced way
Charge equalization
other instructions
none
Product Display