Transistor Single Sided Spot Welding Machine For Lithium Battery With PC

Automatic Transistor Welding Power Supply Single Sided Spot Welding Machine For Lithium Battery With PC

Product Description

Single sided spot welding machine is used to weld nickel sheets with many lithium batteries into a group pack, which is suitable for lithium battery pack assembly in the factory for 14500 18650 21700 26650 32700 etc multi-parallel multi-series combination.

Features:

This machine adopts three welding methods:

Fixed voltage welding : Control the voltage between electrodes, reduce the amount of current, and reduce the generation of sparks during welding

Fixed current welding: passing a certain amount of current, independent of the workpiece resistance, can stabilize welding

Fixed voltage&Fixed current welding: Welding is controlled by setting both current and voltage simultaneously

Output current direction:

MDA-10000B current flows from the positive electrode to the negative electrode (unipolar welding), mainly suitable for power batteries.

MDB-4000B (polarity conversion welding), mainly suitable for digital batteries.

Completion signal: 0-99MS can be set.
Suitable welding range: power batteries/digital batteries/nickel hydrogen nickel chromium batteries/motor rotors/electronic and electrical accessories, etc

Welding thickness: 0.08-0.2MM nickel plating or pure nickel (it is recommended to open a flow guide groove for 0.15-0.2MM nickel plates, while nickel plates above 0.2MM need to be welded with protruding points).

• Can set preheating current, welding current, and cooling
• With slow current rise/fall function
• Easy to install and use
• Fault diagnosis and automatic protection function
• Communication interface: RS485
• Independent external touch screen interface
• Can be controlled by an external industrial computer/PLC, and cooperate with machine automation production

Specification

1. Stroke:500*400mm;

2. Welder: electric transistor 10000A

3. With water cooling system;

4. Welding head rotation function: support 180 degrees rotation;

5. Operating system: embedded system human-machine interface;

6. Support data storage function;

7. Drive mode: step servo motor;

8. Configuration of three sets of fixtures: 18650 with battery holder set, 18650 without holder set, 21700 fixture set, fixture range: within 500mm;

9. Joystick:Joystick for single-sided spot welder, equipped on single-sided welder;

10.With PC

Product Details