XIAMEN ACEY NEW ENERGY TECHNOLOGY CO., LTD.
This copper foil is used as a substrate for coating anode materials in Li-Ion battery research.
Brand:
ACEYItem No.:
A-CuFoCompliance:
CE CertifiedWarranty:
One Year warranty with lifetime supportOrder(Moq):
100 SetsPayment:
L/C,T/T,Western Union, PaypalProduct Origin:
ChinaLead Time:
7daysElectrolytic Copper Foil For Lithium Battery Anode Material
Description
This copper foil is used as a substrate for coating anode materials in Li-Ion battery research.
Specification
|
NO |
Items |
Criteria |
Remarks |
|
|
1 |
Vibration test |
The battery is to be tested in three mutually perpendicular to each axis. |
No fire, no explosion |
|
|
2 |
Drop Test |
Drop the battery from 1m height onto 5cm it 3 times each of X, Y, and Z directions at 25±2°C |
||
|
3 |
Short circuiting Test |
After standard charge,the battery shall be subjected to a short-circuit condition with a wire of resistance less than 100(o) |
||
|
4 |
High temperature test |
Leaving the battery at 85°C for 4hours after standard charge |
No fire, no explosion Capacity≥80%C5 |
|
|
5 |
Heating Test |
The temperature of the oven is to be raised at a rate of 5±2°C/min to a temperature of 130±2°C for 30 minutes. |
No explosion, no fire |
|
|
6 |
Overcharge testing (NO PCM) |
3C 4.6V. |
||
|
7 |
Storage Characteristics 1 |
standard charge and then storage at 25±2°C for 30 days. |
Remaining Capacity≥85% |
|
|
8 |
Storage Characteristics 2 |
1 |
after standard charge and then storage at 60±2°C for 7 days. |
Remaining Capacity≥60% |
|
2 |
the capacity on standard discharge shall be measured after standard charge. |
Recovery capacity≥80% |
||
99.9% Purity Aluminium Foil Roll For Battery Cathode Material With 6um-16um
High Quality Aluminum Foil Roll For Battery cathode Raw Material .
Lithium Battery Pack Comprehensive Testing Machine 100V 10A Charge 120A Discharge
ACEY-BIT100-10A120A lithium battery pack comprehensive tester is designed to test the electrical and safety performance of lithium battery packs. It is widely used in the production and R&D stages of battery assembly lines for power batteries, energy storage batteries, and power tool batteries.
Automatic Polymer Lithium Battery Pouch Cell Sorting Machine
ACEY-PCSM Automatic polymer lithium battery cell sorting machine is a high-efficiency automated machine specifically designed for the post-production sorting of polymer lithium battery cells. It is particularly suitable for applications in power batteries, 3C digital batteries, and energy storage batteries, meeting the precise cell grouping requirements of various battery packs in the new energy sector while complying with international safety standards.
10000A Transistor Manual Gantry Lithium Ion Battery Pack Spot Welding Machine
ACEY-10000T manual gantry lithium-ion battery pack spot welding machine is specifically designed for welding lithium-ion battery packs. Manual operation allows for greater flexibility and control, enabling operators to accurately position the battery pack and welding electrodes.
7 Channels 100V 10A Charging 20A Discharging Battery Pack Aging Cabinet
ACEY-BT10020-7 is mainly used for testing the charging and discharging cycle of finished lithium batteries.The equipment has four test steps: charging, discharging, shelving and cycling. By editing the corresponding step, the battery can be tested according to the set process.
5V20A 30A 60A 100A High Current Energy Feedback Battery Testing Equipment
The equipment has the characteristics of high power, high precision and high performance.
Eight-Channel Battery Life Analyzer Capacity Testing Machine For Cylindrical & Pouch Cell
This battery test system provides most applications in battery testing fields such as electrode materials research, battery performance test, small-scale battery formation, capability grading, battery pack testing and etc.
1-32 Series 500A Charge 800A Discharge Lithium Battery Protection Board BMS Tester
ACEY-BP32-500A800A Battery management system tester with high automation, fast testing speed and high testing accuracy, which can be used to test BMS of MCN battery, LiFeO4 battery and cobalt acid battery. With test functions of overcharge protection, overcharge recovery, overdischarge protection, overdischarge recovery, overcurrent protection,etc.
703, 7F, Zhonghengji Building, No.223, Qishan North Road, Huli District, Xiamen, Fujian, China
Email : allen@xmacey.com
Tel : +8618950009155
Whatsapp : +8618950009155
