-
5 channel automatic sorter machine
Mar 04 , 2021
Cylindrical battery sorting machine is a test and sorting device for the AC internal resistance, DC voltage and other parameters of cylindrical batteries. It comes with a high-precision internal resistance and voltage automatic test system. The equipment is based on the internal resistance and voltage set on the computer software. The voltage value accurately sends the battery to the designated ge...
Read More
-
Coin cell crimper
Mar 15 , 2021
ACEY New Energy has standard sealing die can be used for the sealing of 20mm diameter series of button batteries such as CR2016, CR2025 and CR2032 A set of hydraulic coin cell crimper is very good versatility, as long as the diameter of 20mm unchanged, in a certain range of any thickness of button battery can be sealed, do not need to replace the mold, just turn the sealing die to the appropriate ...
Read More
-
BMS TESTER
Mar 19 , 2021
The main function of BMS is to improve the utilization rate of the battery, prevent the battery from over-charging and over-discharging, and extend the service life of the battery pcak. Monitoring the state of the battery is the core component of the battery pack, the quality of BMS will directly affect the safety and reliability of the battery and the application equipment. The system tests to en...
Read More
-
Battery Pack Equipment is ready for you
Mar 25 , 2021
In today's rapid development of lithium battery industry, Acey has always adhered to her principles, focused on quality, and provided better quality service to customers, which has been recognized by many customers. Recently, ACEY also helped a lot of customized devices from different countries. Automatic spot welder（Travel Customization）, BMS Tester (1-32serires). Our strength lies in our experie...
Read More
-
Why do lithium battery cells need to be tested with battery cell capability grading machine
Apr 16 , 2021
You’ll see, hundreds of batteries are clamped into vertical and horizontal battery cell capacity grading machine in battery cell manufacturing factory or battery pack assemble plant. Row after row, each cabinet can put hundreds of cells, namely hundreds of test points. The lithium cell is converted here to get the capacity, and know the size of the capacity, is the capacity. Through the capacity g...
Read More
-
What’s the function of lithium battery formation?
May 08 , 2021
A lithium-ion Battery formation is activated by a single charge just after it is produced, similar to the way a floppy disk is "formatted". The battery can only start charging and discharging normally after the transformation is completed. The principle is simply that the first charge of the battery activates the active material inside the battery and creates a dense film on the surface of the ano...
Read More
-
Why did the PACK plant need buy a battery sorter?
May 14 , 2021
When the lithium battery cell leaves the factory, the cell factory will carry out capacity test on each cell, so as to divide the cell into three grades: A,B and C. Then on what basis are they divided？ Class A: capacity, size, internal resistance, voltage and other parameters can meet the standard and excellent performance of the cell is generally defined as class A. Class B: the capacity, size, v...
Read More
-
Lithium-ion battery winding and stacking machine which is better? What are the advantages and disadvantages of stacking and winding processes?
May 20 , 2021
With a large number of lithium-ion batteries used as power in mobile phones, digital products, laptop, drone, model airplane, portable energy storage, military industry, new energy vehicles, medical equipment and other fields, the lithium ion battery industry at home and abroad has achieved rapid development. As an important part of lithium-ion battery manufacturing, Stacking and winding technolog...
Read More
