ACEY-AP21S001 is specially designed for 6~21 strings of lithium battery packs.
Brand:
ACEYItem No.:
ACEY-AP21S001-LFPCompliance:
CE CertifiedWarranty:
One Year warranty with lifetime supportPayment:
T/TProduct Origin:
ChinaLead Time:
7days6S-21S 3.2V 100A 200A Software Lifepo4 Smart BMS With UART
Product Introduction
ACEY- AP21S001 is a software protection board scheme specially designed for 6~21 strings of lithium battery packs. The product adopts architecture of front-end acquisition chip + MCU, and some parameters can be flexibly adjusted through the host computer according to customer needs.
Configuration
Function | Configuration | Function | Configuration |
Number of strings supported | 6-21S | 485 communication (isolated) | Optional |
Continuous current | 100-200A optional | UART interface (isolated) |
Optional |
Number of NTCs | 1 built-in, 2 external | CAN communication | Optional |
Balance Function | Passive balance | 232 Communication |
Not supported |
UART (non-isolated) | Standard option | Heating function |
Optional |
Switch function | Optional | Module of Bluetooth | Optional |
Charging current limit | Not supported | Battery packs in series | / |
Battery packs in parallel | Not supported | Secondary protection | / |
History storage | / | LCD display | Optional |
Pre-discharge function | / | LED indicator interface |
Optional |
Buzzer | / | interface |
Optional |
1.The UART interface (non-isolated) does not support communication with chargers or loads.
2. 6 ~ 21 battery cells are protected in series, and the number of battery strings is automatically identified.
Parameter
Cell specifications | 6~21 strings of Lithium Iron Battery |
Interface type | Charge and discharge are both at the same port |
charging voltage | 3.6V*Number of strings |
Cell voltage range | 2.2~3.75V |
Continuous charging current | 100~200A |
Continuous discharging current | 100~200A |
Consumption of running | ≤20mA |
Consumption of sleep | ≤3mA |
Sleep conditions | Delay 60+30s under no current \ communication \ protection state (settable) |
Circuit resistance | ≤10mR |
Operating temperature | -30℃~75℃ |
Structure size of PCB | |
size | 202±0.5mm *76±0.5mm * 18±2mm |
(Length*Width*Height) |
Note: Test should be at temperature25±2°C, and relative humidity 65±20% of surroundings.
Product Display
Related Tags :