4S 80A 3.2v Lifepo4 Smart Bms 12v Protection Board with UART and RS485

【ACEY-SP04S020】4S 80A 12v lifepo4 battery pack smart bms protection board with UART and RS485 for electric motor

Brand:
ACEY
Item No.:
ACEY-SP04S020A
Compliance:
CE Certified
Warranty:
One Year warranty with lifetime support
Order(Moq):
Payment:
T/T
Product Origin:
China
Lead Time:
7days

INQUIRE now

Product Catalog

New Products

Product Detail

4S 80A 3.2v Lifepo4 Smart Bms 12v Protection Board with UART and RS485

Product Introduction

ACEY-SP04S020A.It is specially designed for small energy storage batteries, street lamps,12VLead-acid for lithium battery and other products4Designed for battery packs It can be applied to lithium batteries with different chemical properties, such as lithium ion, lithium polymer, lithium iron phosphate, etc.

The whole system adopts TI(Texas Instruments) front-end acquisition chip+MCU, some parameters can be customized according to customer needs Flexible adjustment through the host computer.

Features

3-4Series cell protection in series.

The cells are intelligently balanced, and the balanced turn-on voltage and differential pressure can be flexibly adjusted through the host computer. Optional charge equalization or static equalization.

Integrated hardware protection functions such as overvoltage, undervoltage, overcurrent, and short circuit.

A variety of working modes, the protection board can disguise and go to sleep when it is static to achieve the purpose of reducing power consumption.

Comes with two communication ports, which can read voltage, current,SOC, temperature, protection status and other data.

UART (TTLlevel) can be externally connected to Bluetooth, computers and non-battery powered devices, isolatedRS485Can communicate with controllers, chargers, etc. device communication.

By default, there are two temperature detection probes, one for detecting the internal temperature of the protection board, and one for detecting the temperature according to customer requirements.

Basic parameters

Cell Specifications	4 strings LiFePO4 battery pack
Interface Type	Charge and discharge at the same port
Recommended charging voltage	14.4V
Operating voltage range	10V~14.6V
Continuous charge current	≤80A
Continuous discharge current	≤80A
Running power consumption	≤20mA
Sleep power consumption	≤200uA
Protection board internal resistance	When the charge and discharge MOS in the board are turned on, the internal resistance from B- solder joint to output solder joint is less than or equal to 10mR
Operating temperature	- 30℃~75℃
Protective plate size	138±0.5mm * 102±0.5mm * 18±1mm(length Width Height)

Electrical Characteristics (The test needs to be carried out in a room with a temperature of 25 ± 2 C and a relative humidity of 65 +/- 20 %)

Features		Specification			unit
Features	project	minimum	Typical value	maximum value	unit
Single Overvoltage Protection	Overvoltage Protection Voltage	3.6	3.65	3.7	V
	Overcharge protection delay time	1000	2000	3000	mS
	Overcharge protection recovery voltage	3.45	3.5	3.55	V
Monomer overdischarge protection	Over discharge protection voltage	2.4	2.5	2.6	V
	Over-discharge protection delay time	1000	2000	3000	mS
	Over-discharge protection recovery voltage	2.7	2.8	2.9	V
	Over-discharge protection recovery conditions	60SInternal voltage self-recovery or charge recovery
Charge overcurrent protection	Charge overcurrent protection value	85	90	95	A
	Charge overcurrent delay	7	10	13	S
	Charge Overcurrent Release Condition	delay32Sautomatic recovery after
Discharge overcurrent protection	Primary discharge overcurrent protection current	85	90	95	A
	Primary discharge overcurrent1protection delay	7	10	13	S
	Secondary discharge overcurrent protection current value	220	280	340	A
	Secondary discharge overcurrent2protection delay	150	320	500	mS
	Discharge overcurrent protection recovery condition	delay32Sautomatic recovery after
Short circuit protection	Short circuit protection circuit	1100	1200	3000	A


	Short circuit protection delay time	-	400	800	uS
	Short circuit protection recovery	Delay after disconnection of load5Srecover.
	Short circuit description	Short circuit description: The short circuit current is less than the minimum value or high above the maximum value may cause the short-circuit protection to fail, short-circuit current exceeds2000A, short-circuit protection is not guaranteed, nor short circuit protection testing is not recommended.
Discharge high temperature protectio(external)	n temperature protection value	72	75	78	°C
Discharge high temperature protectio(external)	Temperature protection release value	62	65	68	°C
Discharge low temperature protection(external)	temperature protection value	-13	-10	-7	°C
Discharge low temperature protection(external)	Temperature protection release value	-3	0	3	°C
Charging high temperature protection(external)	temperature protection value	62	65	68	°C
Charging high temperature protection(external)	Temperature protection release value	52	55	58	°C
Charging low temperature protection(external)	temperature protection value	-3	0	3	°C
Charging low temperature protection(external)	Temperature protection release value	4	5	8	°C
FETDischarge high temperature protection(built-in curing)	temperature protection value	85	90	95	°C
	temperature protection value	85	90	95	°C
	Temperature protection release value	65	70	75	°C
Equalization function	Turn-on voltage	3.35	3.4	3.45	V
	Open differential pressure		15		mV
	Balance current	40		70	mA
	Balanced way	Charge equalization
	Balance type	Time-sharing equalization/pulse equalization