Xiamen Acey New Energy Technology Co.,Ltd
![$this->product_detail['product_name']](/uploadfile/category/db6e9c0d653a96dbd1612d6f8f719bdf.jpg)
The function of Insulation Paper Pasting Machine is to paste a layer of barley paper outside the positive pole of the cylindrical battery, so that it has good insulation, wear resistance, waterproof and other characteristics, and effectively prevent the positive and negative short circuit of the power battery pack during vibration.
Brand:
ACEYItem No.:
ACEY-BS02Compliance:
CE CertifiedWarranty:
One Year warranty with lifetime supportOrder(Moq):
1Payment:
T/TProduct Origin:
ChinaLead Time:
7days32140 33140 Cylindrical Battery Cell Insulation Paper Sticking Machine For BAK GOTION CATL EVE Cylinder Battery
Product Description
Battery Cell Insulation Paper Sticking Machine is to paste a layer of barley paper outside the positive pole of the cylindrical battery, so that it has good insulation, wear resistance, waterproof and other characteristics, and effectively prevent the positive and negative short circuit of the power battery pack during vibration.
Product Parameters
1. Equipment power: 220V 50HZ, 1.5KW, 220V AC input
2. Use air pressure: 0.4-0.8Mpa, when using the air source, there must be a filter device to ensure that the air flow is free of water and impurities.
3. Scope of application: suitable for 32140/33140/34189 or customized battery cell positive pole paste insulating barley paper.
4. Suitable for barley paper width: 100MM
5. Production efficiency: about 60PPM, 2pcs one pouching, 4000pcs per hour.
6. Cushioning power: 0.75KW frequency conversion motor debugging, equipped with buffer power to ensure that the battery core is not damaged.
7. Double robots pick and place the battery.
8. Pasting effect: good consistency, firm bonding and beautiful appearance
Maintenance
1. Daily maintenance
Clean the splashes on the workbench and panel with a dry cloth every shift.
Clean the punching knife in a timely manner during work
Timely replace severely worn punching knives
Turn off the power when leaving work.
2. Weekly maintenance
Focus on cleaning and erasing splashes on the surface of the workbench, the punching knife, and the panel.
Quarterly maintenance
Open the cover and apply No. 0 grease to all moving parts (not too much)
3. Half year maintenance
Open the machine box door and apply butter to the following areas:
Guide moving parts
Screw motion accessory
Welding head guide shaft assembly
Product Details
Cylindrical Battery Cell Automatic Insulation Paper Pasting Machine
ACEY-BS01 is an automatic equipment for pasting barley paper on cylindrical batteries,which can reduce the cost and risk of manual operation and improves the production efficiency and product quality. Also, it can adapt to different specifications of cylindrical batteries for production with good stability and reliability.
2 in 1 Insulation Paper Pasting Machine And Sorting Machine For Cylindrical Cell
ACEY-SS11 is an automatic device for 18650/21700/26650/32650/32700 batteries to sorting and sticker. it has been a cost-effective sticker and sorting combination integrated equipment. The two machines are loaded and received in the same direction. They can be combined with single operation or separately.
Cylindrical Battery Sorting Machine And Insulation Paper Sticking Machine 2 in 1
ACEY-SS11 is an automatic device for 18650/21700/26650/32650/32700 batteries to sorting and sticker. it has been a cost-effective sticker and sorting combination integrated equipment. The two machines are loaded and received in the same direction. They can be combined with single operation or separately.
Automatic Insulation Highland Barley Paper Pasting Machine for 32140 33140 Cylindrical Battery
ACEY-BS02 automatic insulation paper sticking machine is mainly used to stick a layer of barley paper on the positive or negative pole of 32140 33140 batteries to provide good insulation, wear resistance, waterproofing and other characteristics.
7 Channels 100V 10A Charging 20A Discharging Battery Pack Aging Cabinet
ACEY-BT10020-7 is mainly used for testing the charging and discharging cycle of finished lithium batteries.The equipment has four test steps: charging, discharging, shelving and cycling. By editing the corresponding step, the battery can be tested according to the set process.
Lithium Ion Battery Ultrasonic Tab Metal Spot Welding Machine
Ultrasonic Spot Welder Ultrasonic spot welding metal tabs common to the winding and welding a metal lamination process
Manual Sealing Machine For 18650 Cylindrical Battery
It is mainly used in the sample production of laboratory battery material research and development for the scientific research sealing of cylindrical batteries and cylindrical capacitors
1500W Cnc Fiber Laser Welding Machine For Lithium Ion Batteries
This laser welding machine is mainly used for sealing welding of square aluminum shell batteries, usually aluminum row welding, and the weld seam is required to be beautiful, and the weld seam width>1mm.
703, 7F, Zhonghengji Building, No.223, Qishan North Road, Huli District, Xiamen, Fujian, China
Email : allen@xmacey.com
Skype : tangrutian
Tel : +8618950009155
Whatsapp : +8618950009155
