Lab Purification Vacuum Glove Box With Water And Oxygen Content Below 1ppm

Configuration and Quantity

Technical parameters

Remark

1 Main Chamber

L1220 x W760 x H900

Stainless steel 304 with 3 mm thickness

Round corner for easy cleaning

1 transparent visualization panel

thickness: 10mm

Inclined panel of tempered window glass with thickness of 10mm;

1 leg support

H = 900mm

Carbon steel, with casters (with support feet), convenient mobile glovebox, fine-tune the level

2 Shelves

Stainless steel SUS304

Adjustable type shelves

L x D = 800 x 200 mm

2 Glove Port

Aluminum alloy: ∅220mm

Option material: stainless steel / Polyoxymethylene polymer

2 Gloves

Cuff diameter 8”,

Length 800mm,

Thickness: 0.4mm

Material: butyl rubber;

O-ring sealed

Option material: Neoprene / Rubber

1 Power Board

220 VAC

220 VAC, 50 Hz, single phase

1 Lighting system

Lamp, ballast

Built-in fluorescent lamp

2 HEPA filters

Subject to HEPA standards

Inlet and outlet filter can eliminate particle size >0.3 μm, installed in the cabinets

4 KF40 Spare connectors

KF40

Configuration quick connector, located in the box right side, so that the liquid or gas can be easily and safely in and out of the cabinet.

Material: SUS304 stainless steel

1 Electrical Feedthrough

Connect Use

Installed on one of 4 KF40 Spare connectors

1 Gas / liquid Feedthrough

Connect Use

Installed on one of 4 KF40 Spare connectors

Configuration and Quantity

Technical parameters

Remark

1 Gas purification system

Single purification column (GP-1);

A Closed Loop Gas Re-circulation System;

With water scavenging, and oxygen scavenging function;

German BASF copper catalyst materials, USA UOP efficient absorbent molecular sieve materials,

The purification system of regeneration process automatically control,

Long-term, continuing to maintain gas purity: H2O & O2 < 1ppm.

Oxygen removal:  40L

Moisture removal:  1.3kg

1 Foot controller

Waterproof Double pedal

Control purification system to increase the pressure and decrease the pressure in the cabinet.

1 Purge valve

Electro-pneumatic valve

Automatic electro-pneumatic valve

1 Circulating Blower

High-speed frequency blower

High degree of vacuum of the circulation pump with various speed; Blower Speed: 25L/S.

2 Pipe line

Stainless steel SUS304

Stainless pipe lines

1 Cooling System

Include 1 heat exchanger

Used for high temperature operation of users in the main chamber, which cause temperature >45°C

Pressure Control unit

+15 mbar to -15mbar

(relative pressure)

Box pressure with Automatic control;

Manual pressure control is allowed with foot pedal switch (from +15 mbar to -15 mbar)

Controller

A Programmed Logical Controlled with Siemens 7” HMI

Color Touch Screen Monitor

Auto Display of moisture and oxygen level during working conditions

Moisture & Oxygen control system

New Upgraded Color touch screen: 7 inch

PLC control system, touch-screen operation,

* Moisture concentration: 0～1000ppm, with an accuracy of 0.1ppm

* Oxygen concentration: 0～1000ppm, with an accuracy of 0.1ppm

* Automatic system data logging