XIAMEN ACEY NEW ENERGY TECHNOLOGY CO., LTD.
![$this->product_detail['product_name']](/uploadfile/category/d29808239dd7677a1415cfbfa4906a69.jpg)
Brand:
ACEYItem No.:
ACEY-HRCDS-60V30A-24CHCompliance:
CE CertifiedWarranty:
One-year warranty with lifetime supportOrder(Moq):
1Payment:
T/TProduct Origin:
ChinaLead Time:
7-35 days60V 300A 2CHS Energy-saving Battery Pack Charge and Discharge Test System
Product Function
ACEY-HRCDS-60V300A-2CH Battery pack charge discharge test system supports battery circle life testing, capacity testing, charging characteristic testing, discharging characteristic testing, charge retention capability testing, charge and discharge efficiency testing, over charge or over discharge rate affordability testing.
Working Environment
Advantages
Technical Parameters
| No. | Item | ACEY-HRCDS-60V300A | ||
| 1 | Main channels | 1CH/ module | ||
| 2 | Output power | The maximum power of channel operation is 18kW; timeless | ||
| 3 | Output power stability | ±0.1%FS | ||
| 4 | Power quality at input side | Power factor | ＞99%(full load) | |
| Total harmonic distortion rate | ≤5%(full load) | |||
| 5 | Energy consumption parameters | Standard sine wave feedback energy, high efficiency (optimal efficiency 90%%) | ||
| 6 | Main channel working mode | Charge: CC, CV, CCCV, no voltage or current impact when CC transfer to CV | ||
| Discharge: CD, CP, CR | ||||
| Still | ||||
| Working condition test; Pulse test. | ||||
| 7 | Main channel Voltage | Single channel test range | 0.2V-60V, The intermediate value is continuously adjustable (wide test range, applicable to the test requirements of various battery modules) | |
| Min. discharge voltage | 12V（Port voltage） | |||
| Accuracy | ±0.05%FS | |||
| Resolution | 1mV | |||
| Main channel Current | Single channel test range | ±300A | ||
| Min. output current | 150mA | |||
| Accuracy | ±0.05%FS | |||
| Resolution | 1mA | |||
| Current start response time | ＜5ms(10%~90%FS) | |||
| Time | Resolution | 10ms | ||
| Auxiliary voltage (Optional) | Range | DC: 0-5V | ||
| Accuracy | ±0.05%FS | |||
| Resolution | 1mV | |||
| Auxiliary temperature (Optional) | Range | ﹣20℃～100℃ | ||
| Accuracy | ±1℃（0℃～70℃） | |||
| Resolution | 0.1℃ | |||
| 8 | Communication | LAN | ||
| Battery BMS communication | Support CAN 2.0A, CAN 2.0B; RS485 communication | |||
| Support DBC import, realize data reading with BMS CAN, and participate in process control | ||||
| 9 | Control program | Support data protection when power off, continue testing caused of power cutoff or manually stop and revise step parameter online. | ||
| Users can set protection condition, include minimum voltage, maximum voltage, minimum current, maximum current, maximum temperature, minimum temperature, etc. | ||||
| Users can set auxiliary channel protection condition, including minimum voltage, maximum voltage, maximum temperature, minimum temperature. | ||||
| Cycle time | Max. 10000 | |||
| Programmable step | Max. 10000 | |||
| Nested loop | Max. 10 layers | |||
| Step time range | No limit, support h, min, s | |||
| Data record | Time≥10ms,Voltage≥0.1%FS, Current ≥0.1%FS | |||
| Program feature | Each step has one or multiple exit | |||
| 10 | Working mode (Unit voltage and temperature are optional) | Constant current charging | Battery voltage, time, capacity, energy, temperature, cell voltage, cell voltage difference, RSOC cut-off. | |
| Constant voltage charging | Current, time, capacity, energy, temperature, cell voltage, cell voltage difference, RSOC cut-off. | |||
| Constant current and constant voltage charging | Battery voltage, current, time, capacity, energy, temperature, cell voltage, cell voltage difference, RSOC cut-off. | |||
| Shelve | Deadline | |||
| Constant current discharge | Battery voltage, time, capacity, energy, temperature, cell voltage, cell voltage difference cut-off. | |||
| Constant power discharge | Battery voltage, current, time, capacity, energy, temperature, cell voltage, cell voltage difference cut-off. | |||
| Constant resistance discharge | Battery voltage, current, hour time, capacity, energy, temperature, cell voltage, cell voltage difference cut-off. | |||
| 11 | Data display(Unit voltage and temperature are optional) | Cycle list | Circulation number. Charge/discharge capacity, efficiency, power and average voltage, etc. | |
| Process list | Process number, working mode, process time, capacity, power, DIR, medium voltage, cut-off voltage, cut-off current, etc. | |||
| Detail list | Record number, system time, cumulative time, voltage, current, energy, power, cell temperature, monomer voltage l -- monomer voltage n, monomer voltage range etc. | |||
| 12 | Data export | Data can be exported as EXCEL, TXT or diagram. Provide data analysis curves and data lists in various ways, such as charge discharge curve, capacity decay rate, cycle life curve, charge discharge voltage, current, capacity, current time characteristics, etc | ||
| 13 | Data saving | Save as files | ||
| 14 | Curves type | X-coordinate: total time, charge discharge capacity, cycle time, voltage, current, capacity | ||
| Y-coordinate: total voltage, current, capacity, power, monomer voltage l-monomer voltage n, temperature 1-monomer temperature n, etc | ||||
| 15 | Input protection | Overvoltage, overcurrent, phase loss, over temperature, protection alarm; | ||
| Output protection | Overvoltage, overcurrent, short circuit, capacity, temperature, single overvoltage and single undervoltage protection; No output when the battery voltage is not detected; | |||
| Power off protection | After external power failure, the battery and equipment are automatically disconnected, effectively avoiding accidents caused by re energization; | |||
| Hardware protection | Power off protection, open circuit protection and short circuit protection; Reverse connection of battery, wrong connection protection, overcurrent protection, overvoltage protection, overtemperature protection, hardware overvoltage, undervoltage and overcurrent protection; | |||
| Short circuit protection | External short circuit; | |||
| Software protection | Power off data protection, power resume continue testing, OVP, ODP, OCP, UCP, OTP, capacity protection, abnormal voltage trend protection, abnormal current trend protection, abnormal current fluctuation protection, abnormal voltage fluctuation protection, abnormal charging voltage increase rate protection, abnormal discharge current decrease rate protection, equipment communication abnormal protection, auxiliary module communication abnormal protection; | |||
| Warning function | Switch off automatically under emergency, shutdown when power off, load connect and disconnect automatically. | |||
| 16 | Barcode scan | Support barcode start and binding test data, classify batteries rapidly and accurately. Support detailed battery database management functions, connect battery information with testing data base, which is easy for management of data base system. | ||
| 17 | Cooling method | Forced Fan-cooled | ||
| 18 | Sampling terminals | Four-polar sampling. Copper nose or other fixture. | ||
| 19 | Auxiliary channel acquisition line | The length of acquisition cable can be adjusted according to the actual situation | ||
| 20 | Noise | Less than 70dB | ||
| IP grade | IP20 | |||
| 21 | Repair | Modularized structure. Can be replaced or repair with spare parts. | ||
| 22 | Software update | Provide regular software upgrade services until the hardware is incompatible. | ||
Product Display
5V20A 30A 60A 100A High-Precision Energy Feedback Battery Pack Test System
5V20A 30A 60A 100A 120A high-precision battery test system is mainly designed for the power battery/battery pack. Charging energy-saving, the highest efficiency can reach 80%; discharging energy-saving feedback to the grid, the highest efficiency can reach 78%.
Battery Pack 30V 10A Charging 20A Discharging Aging Machine
ACEY-BT3020-6 is mainly used for charging and discharging cycle test of finished lithium battery packs.
70V 85V 100V Lithium Battery Pack 10A Charging 20A Discharging Cycle Tester
Battery Charge-Discharge Aging Tester is an instrument used to test the performance of battery packs, mainly used to measure the voltage, current, capacity, internal resistance and other indicators of the battery pack.
Multi-Channel Input and Energy Regenerative EV Lithium Ion Battery Pack Cycle Life Testing Machine
The system has the function of multi-channel input and energy regeneration, which can save a lot of electric energy consumed in the process of charging and discharging. Applicable for electric vehicles, power tools, garden tools, household and outdoor energy storage.
4 Channels 100V 60V 100A 60A Energy Feedback Regenerative Charge and Discharge Lifepo4 Battery Module & PACK Tester
The system has the function of multi-channel input and energy regeneration, which can save a lot of electric energy consumed in the process of charging and discharging. Applicable for electric vehicles, power tools, garden tools, household and outdoor energy storage.
Battery Pack Regenerative Charge and Discharge Testing System
ACEY-CE-7000-R2 adopts IGBT( Insulated Gate Bipolar Transistor ) technology which is much different from traditional power devices and control methods. Much stable and reliable testing control performance decide the best testing solution for power battery and energy storage battery.
High Voltage Current Charge and Discharge EV Lithium Battery Pack Testing System Capacity Analyzer
ACEY-CE-7002 adopts IGBT( Insulated Gate Bipolar Transistor ) technology which is much different from traditional power devices and control methods. It supports testings: battery modules & packs, cells including lithium-ion battery, lead-acid battery, flow battery and supper capacitor. Comparing ACEY-CE-7000-R2, it occupies less space.
100V 100A Regenerative Battery Pack Test System
100V 100A regenerative battery pack test system is mainly used for circle life testing and quality control of li-ion battery, lead-acid battery, Ni-Cd battery, NiMH battery and so on in production line or in lab.
703, 7F, Zhonghengji Building, No.223, Qishan North Road, Huli District, Xiamen, Fujian, China
Email : allen@xmacey.com
Tel : +8618950009155
Whatsapp : +8618950009155
