Language : English

English

5L Lab Vacuum Stirrer Mixing Machine Dual-shaft Vacuum Mixer

This mixing machine is suitable for dry and wet stirring. It is made of SUS304 stainless steel and is resistant to acid, alkali and organic solvents.

  • Payment:

    L/C,T/T,Western Union, Paypal
  • Brand:

    ACEY
  • Item No.:

    ACEY-PVM-5L
  • Compliance:

    CE Certified
  • Warranty:

    One Year warranty with lifetime support
  • Order(Moq):

    1
  • Product Origin:

    China
  • Lead Time:

    7days
  • Product Detail

5L Lab Vacuum Stirrer Mixing Machine Dual-shaft Vacuum Mixer

Description

Mixing principle of ACEY-PVM-5LThe low-speed stirring paddle and the serrated dispersing disc installed on the high-speed dispersion shaft both rotate and revolve; at the same time, combined with the low-gap design of the stirring paddle, the low-speed stirring paddle makes the material produce strong kneading interference motion and up-down/left-right circulation; The high-speed dispersing disc strongly shears and breaks up the materials; thus finally ensuring that the materials are fully dispersed and evenly blended

Specification

Features

*Four-blade double-shaft planetary mixing, twist frame mixing blade with high-speed dispersion plate and wall scraping, no mixing dead angle;
*Low-speed stirring realizes macro-mixing through public and rotation, and high-speed dispersing disc realizes micro-mixing through shearing force;
*Vacuum environment, effectively eliminate the bubbles generated during the stirring process, the vacuum maintaining effect is good;
*Multi-stage speed operation can be carried out, and the stirring speed and time of each stage can be set
*The slurry bucket lifting design, equipped with spotlights, is convenient for operation, and ensures the safety during the vacuum mixing process;
* Jacketed mixing tank design, can pass cooling water, suitable for various process requirements, with temperature controller and high temperature alarm system;

Product name and specification model

A. Planetary dispersion vacuum mixer ;

Basic structure

A. Cantilever structure hydraulic lifting bucket;
B. Single direct temperature measurement mode;
C. Single dispersion shaft + double stirring shaft + with scraping wall

Barrel (mixing barrel)

A. Specification: Dia. 240mm×180mm;
B. Design volume: 08L;                        C. Effective volume: 2L.

A. Liner material: SUS304;
B. Mirror polished after turning of the inner wall to ensure good roundness;
C. The upper flange plane of the mixing tank and the upper tank body are sealed by a sealing ring;
D. G1/2" discharge ball valve at the bottom of the barrel;
E. A pair of handles on the barrel body.

Pure jacket direct cooling/heating

The water inlet and outlet ports are G3/8", equipped with quick-opening unions; the jacket can pass cold or hot water to cool or heat the processed material.

Revolution/mixing motor and Inverter, reducer

A. Quantity: one set;                   B. Motor power: 1.5Kw/4P;
C. 1.5KW frequency converter matched with the motor;
D. Matching reducer BL1, reduction ratio of about I=29, use factor Fa=1.0 .

Planetary revolution speed

Speed: 0~50rpm (reference system: ground), adjustable.

Wall scraper

scraping material: SUS304 and Teflon; consistent with revolution speed.

Gap reference value

(Not mandatory)

A. Tolerance of mixing paddle and bottom: 24 mm;
B. Tolerance of mixing paddle and barrel wall: 3±1.5 mm;

Stirring shaft/stirring
paddle speed

Speed: 0~80rpm(Reference system: planetary box); or 0~130rpm (reference system: ground); adjustable.

Stirring slurry form

"Spiral twist type"; linear velocity: 0~0.55m/s (reference system: planetary box).

Dispersed motor

A. Quantity: one set;                        B. Motor power: 2.2Kw/2P;
C. With frequency conversion speed controller matched with the motor.

Dispersion speed (rotation)

A. Speed: 0~6000rpm, adjustable;          B. Linear speed: 0~17m/s.

Dispersing shaft and disc

A. Material: SUS304;
B. One, a dispersion plate is installed on the dispersion shaft to ensure better dispersion/mixing.
C. Diameter of dispersion plate: Φ55mm;

Lifting (mixing barrel)

A. Hydraulic lifting: piston cylinder Φ63/D40×S270; equipped with double guide rods, positioning device; safe and reliable positioning.
B. One set of hydraulic oil pump station, equipped with a 0.37Kw/4P motor; no oil leakage, low noise.
C. Lifting height: ≤270.

Vacuum system

A. The stirring and dispersing process can be carried out under vacuum; vacuum degree: ≤-0.098mPa.
B. Equipped with vacuum pump 2XZ-2.        C. With vacuum buffer tank and switch.
D. Dynamic seal: mechanical seal; static seal: O-ring seal.
E. Maintain the pressure for 24 hours, and no oil leaks into the slurry tank in the state of mixing or maintaining pressure.

Temperature
measurement method

0-300, the temperature probe is located on the wall of the barrel (or the bottom of the barrel) near the bottom of the barrel, contacts the material and displays the temperature.

Total power of main engine

Working voltage/frequency: 380V/50Hz/3Phase; control voltage: 220→24V.
3.7KW+ power of lifting motor: 0.37kw

Product Display


One-stop Solution

Flow-chart of Coin Cell Lab-scale Fabrication

Flow-chart of Cylindrical Cell Lab-scale Fabrication

Flow-chart of Pouch Cell Lab-scale Fabrication




Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related Products
0.5L Battery Electrode Slurry Filter System 500ML Battery Electrode Slurry Filter System

ACEY-SF-1-500ML battery electrode slurry filter system aims to optimize the slurry conditions before the coating process, which can improve the quality and stability of the battery slurry.

150ML Vacuum Mixing Machine 150ML Vacuum Mixing Machine For Battery Material Mixing

The cup type vacuum mixer is a high-efficiency equipment integrating vacuum mixing and dispersion.

Lab Planetary Vacuum Mixing Machine 250ML Multi-stage Speed Planetary Vacuum Mixing Machine

Planetary Vacuum Mixing Machine is a high-quality mixer tool for preparing battery electrode paste and various ceramic materials in a research lab.

Electric Vacuum Mixer 1L Battery Slurry Mixing Machine Electric Vacuum Mixer With Tank

This instrument is suitable for preparing LiCoO3, LiFePO4, Phosphor and various ceramic slurries where gas bubbles must be kept at minimum.

Rewinding and Unwinding System For Battery Roller Press Machine Rewinding and Unwinding System For Battery Hydraulic Roller Press Machine

This product can be used together with ACEY-HR300 roller press to improve battery production efficiency.

Three-roll Transfer Battery Anode And Cathode Coating Equipment Three-roll Transfer Coating Equipment For Battery Anode And Cathode

The coater is a three-roll transfer coating equipment, which is convenient to apply to various substrate surface coating processes.

Winding Machine For Pouch Cell Mobile Phone Battery Electrode Winding Machine For Pouch Cell

The semi-automatic square winding machine is an equipment that can be applied to the winding process of square batteries.

11 Channel 18650 26650 32650 Battery Sorting Grading Machine 11 Channel 18650 26650 32650 Battery Sorting Grading Machine For Cylindrical Cell

18650/26650/32650/21700 li-ion batteries test & sorting machine.

Leave a message
Leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

about

contact