Environmental Chamber For Battery Testing

Environmental chamber for battery testing is a specialized facility designed to simulate various environmental conditions to assess the performance, safety, and reliability of batteries.

Brand:
ACEY
Item No.:
ACEY-BETC
Compliance:
CE Certified
Warranty:
One Year warranty with lifetime support
Order(Moq):
1
Payment:
T/T
Product Origin:
China
Lead Time:
7days

INQUIRE now

Product Catalog

New Products

Product Detail

Environmental Chamber For Battery Testing

Product Description

Environmental battery test chamber is a controlled environment specifically designed for testing batteries under various environmental conditions. These chambers play a crucial role in evaluating the performance, safety, and reliability of batteries in different scenarios that simulate real-world conditions.

Specification

Battery Drop Tester	test method Faces, edges and corners fall in all directions Test load 0～3kg Maximum size of specimen: W200 x D200 x H200mm Drop floor medium A3 steel plate (acrylic board, Dali SLATE, wood for choice) Drop panel size: W600 x D700 x H10mm（Solid steel plate Weight About: 250kg Dimension: W700 X D900 X H1800mm Motor Power: 0.75KW Drop way: Pneumatic fall Lift way: electric lifting Power Supply: 220V 50Hz Safety device: Fully enclosed explosion-proof device Air pressure: ＜1mpa Control display mode: PLC touch screen
Battery short circuit test chamber	Short circuit control box part:： 1, Control mode: PLC touch screen control system 2, voltage: 0-100V 1 channel 3, short circuit current: 0-1000A 4, temperature acquisition: 0~500℃ 1 channel 5, impulse voltage: AC 1KV / 1.2-50μS (peak) 1min 6, DC response time: ≤5μs 7, device resistance: 80 + 20 m Ω (400 a) load current 8, acquisition system: can monitor the battery voltage, current, temperature (1 channel)
Simulate high altitude and low pressure test chamber	satisfying criteria：UN 38.3 /UL 1642/GB 31241 Chamber construction： 1, inside size: 500(W) * 500(D) * 500(H)mm; 2, the external size about: 700(width) * 650(depth) * 1270(high)mm in kind shall prevail; 3. Interlayer: the inner box is divided into two layers, with two mesh plates; 4, can window: the door has 19mm toughened glass window, specification W300*H350mm; 5, the inner material is: 304# stainless steel industrial plate thickness is 4.0mm, internal strengthening treatment, vacuum does not deform; 6, the external material is: cold rolled steel plate, thickness of 1.2mm, powder baking paint processing; (beige white) 7. Hollow filling material: rock wool, good heat preservation effect; 8, the door sealing material is: high temperature resistant silicone strip; 9. Install movable brake casters, which can be fixed in position and pushed freely; 10. The structure of the box is connected, and the operating panel and vacuum pump are installed below the machine.
Battery burning test machine	1, inside the box size: 750x750x500mm (width x depth x height); 2, equipment dimensions: 900x900x1300mm (wide x deep x high); 3, the inner box material: SUS201 stainless steel plate, thickness of 1.2mm; 4. Material of the outer box: 1.5mm thick cold-rolled steel plate baking paint processing; 5, observation window: size of 250x250mm two layers of toughened glass, transparent window equipped with stainless steel mesh; 6, smoke outlet: diameter of 100mm, located at the back of the box; 7, pressure relief port: opening size 200x200mm, located at the back of the box body, when the sample explosion, pressure relief port bounce off the pressure; 8. Box door: single door opens to the left, the box door is equipped with a safety limit switch, and the side is equipped with an explosion-proof chain. The equipment can only be operated when the door is closed. Ensure the safety of personnel; 9. Control mode: PLC touch screen control 10. Bunsen burner: the inner diameter of the nozzle is 9.5mm and the length is about 100mm 11, Burning time: 0-99H99, H/M/S unit can be switched 12, the test hole diameter: 102mm 13, the test mesh size: by the diameter of 0.43mm stainless steel wire woven into the United States inch containing 20 mesh mesh screen 14, the flame to the screen height: 38mm 15, the width of the octagonal net cover: the distance between each other is 24 "(610mm), octagonal, octagonal for easy replacement and disassembly 16, octagonal mesh cover height: 12 "(305mm) 17, Octagonal cover material: aluminum mesh, by the diameter of 0.25mm aluminum wire woven into 16-18 mesh per inch network composition 18. Combustion gas: methane or liquefied petroleum gas (customer-provided) 19. Equipment weight: 160kg
Thermal abuse test chamber	Box structure size: 1. Internal dimensions: 500 (width) × 500 (depth) × 500 (height) mm; 2. Approximate external dimensions: 770 (width) × 720 (depth) × 1270 (height) mm, based on the actual product; 3. Control panel: The control panel is installed above the machine (as shown in the figure); 4. Door opening method: single door opens from right to left; 5. Viewable window: The door has a window, specification W300*H400mm; 6. The inner material is: 304# stainless steel mirror panel, 1.2mm thick; 7. The outer material is: cold-rolled steel plate, 1.2mm thick. Powder baking finish (wrinkle grayish white); 8. Interlayer: The inner part is adjustable in two layers, the first layer is 100mm from the bottom, and the above is divided equally, with two mesh panels; 9. The insulation material is: high temperature resistant rock wool, with good insulation effect; 10. The sealing material is: high temperature resistant foamed silicone strip; 11. Test hole: One test hole is opened on the right side of the machine, with a diameter of 50mm; 12. The machine is equipped with movable casters and adjustable fixed foot cups for easy movement and fixed position.
Battery weight impact testing machine	1. Falling ball weight: 9.1kg±0.1kg 2. Impact height: 0~1000mm adjustable 3. Height display: display through altimeter, accurate to 0.1mm 4. Height error: ±5mm/ 5. Impact method: lift the falling ball to a certain height and release it, and the falling ball falls freely in the vertical direction without tilting or shaking; 6. Display mode: PLC touch screen displays parameter values 7. Diameter of the horizontal bar: 15.8±0.2mm (5/8 inch) steel bar (vertically placed in the middle of the battery, heavy objects fall on the steel bar, and the steel bar is kept parallel to the bottom surface of the square battery;) 8. Inner box material: SUS#304 stainless steel plate, thickness 1mm, 1/3 of the place is pasted with Teflon melt tape, high temperature resistance, corrosion resistance, easy to clean insulation 9. Outer box material: cold-rolled sheet baking varnish treatment, thickness 1.5mm 10. Exhaust outlet: located on the back of the box, with a diameter of 120mm, and an external exhaust duct with a diameter of 110mm, which is convenient for connecting to the laboratory with high power Exhaust fan 11. Box door: single-door double-layer door, open tempered glass observation window, cold handle door lock, box door with silicone foam compression strip; 12. Upper and lower impact surface: stainless steel plate 13. Visual window: 750mm*280mm 14. Lifting method: electric lifting 15. Power supply: 1∮, AC220V, 3A 16. Power supply: 700W 17. Weight (approximately): about 250kg
Battery washing test machine	1. Control method: PLC touch screen control; 2. Drive mode: Servo motor drive; 3. Solution temperature range: normal temperature~80℃ (adjustable), the usual temperature is 45±2℃; 4. The outer diameter of the test turntable: Ø500±10mm; 5. Diameter of test inner barrel: 650mm; 6. Depth of test inner barrel: 600mm; 7. Turntable speed: 1-850r/min adjustable; 8. Inner box material: SUS#304 stainless steel; 9. Outer box material: cold-rolled steel plate paint treatment; 10. Test time: 0-9999H/M/S adjustable; 11. Temperature control method: P.I.D control; 12. Washing solution: configure a solution with a pH of 11.0±0.1 (a NaOH solution with a mass fraction of 0.004% can be used), and heat the solution to (45±2)°C; 13. Immersion: Fix the sample on the rotating device (washing paddle), then place the sample in the solution (the height of the battery center from the liquid surface is 300mm±10mm) and soak for 0.5h. Keep the temperature of the solution at (45±10mm) during the test. 2) °C; 14. Dimensions: 1200x1150x1880 mm (width x depth x height); 15. Equipment weight: 230kg 16. Power supply: AC220V 17. Power: 6KW
Computerized battery extrusion needling machine	1. Drive mode: servo drive 2. Force range: 1 ~ 20kN 3. Force measurement accuracy: 0.1N 4. Unit conversion: kg, N, lb 5. Extrusion stroke: 200mm or 300mm 6. Control system: All extrusion forces of 1-20KN can be set by the computer, and the deformation variables can be set by themselves. Test data such as force curve, deformation, battery surface temperature can be displayed, and test data reports can be exported; 7. Signal transmission mode: RS 232 serial port or USB 2.0 high-speed transmission serial port; extrusion speed: (5±1) mm/s 8. Extrusion direction: horizontal and vertical downward direction, the extrusion plate is extruded from top to bottom; Extrusion degree: extrusion continues until the actual pressure reaches 13kN±0.2kN, hold the pressure for 1min, once the maximum pressure is reached, the equipment will automatically Relieve the pressure to complete the extrusion; or reach the set extrusion deformation and hold the pressure for 1 min, then the equipment will automatically release the pressure to complete the extrusion; Maximum pressure range: 1 kN ~ 20kN (usually 13 kN); 7. Battery extrusion head: standard extrusion head, area 150mm² or 200mm² 8. Extrusion degree: Extrusion pressure reaches 13±0.2kN, keep for 1min. 9. Box material: inner box stainless steel, outer box cold-rolled steel plate spray treatment 10. Features: The rear side of the box is designed with an exhaust port and a pressure relief device, and the box is equipped with a lighting lamp 11. Test stroke space: 250x300x250mm (length x width x height) Acupuncture index: 1. Steel needle: φ3mm φ5mm φ8mm high temperature resistant steel needle each with a length of 100mm (can be specified). 2. Acupuncture stroke: 200mm or 300mm 3. The distance between the battery can be clamped: 200mm 4. Unit conversion: Kg, N, LB 5. Needling speed: 10～40mm/s (can be specified) 6. Acupuncture force value: 1～300Kg (optional) 7. Test data display: The computer test software displays the force value curve, numerical value, battery surface temperature change, etc. 8. Force measurement accuracy: ±1% 9. Drive mode: servo drive 10. Box material: inner box stainless steel, outer box cold-rolled steel plate spray treatment 11. Product features: The rear side of the box is designed with exhaust vents and pressure relief devices. The box is equipped with lighting lamps, the door is equipped with an explosion-proof chain, and the bottom of the test box is attached with Teflon to prevent the electrolyte from corroding the box and easy to clean. 12. Visible window: 300mm300mm tempered explosion-proof glass with a thickness of 20mm. The movable stainless steel wire explosion-proof screen increases the safety performance and is also convenient for extraction and cleaning. 13. Power supply: AC380V, 50HZ 14. Dimensions: about 1700mm600mm600mm (length width * height) 15. Weight: about 220kg