-
Brief analysis of the eight advantages of polymer lithium-ion batteries
Jul 23 , 2021
Brief analysis of the eight advantages of polymer lithium-ion batteries 1. Good safety performance The structure of the polymer lithium-ion battery is aluminum-plastic soft packaging, which is different from the liquid battery with a metal shell. Once a safety hazard occurs, the liquid battery is easy to explode, while the polymer battery can only be inflated. 2. Lightweight Polymer batteries are ...
Read More
-
How to judge the performance of lithium battery testing equipment？
Jul 29 , 2021
With the development of new energy, the use of lithium batteries is becoming more and more common. This also puts higher and higher requirements on the detection of lithium batteries. So how to judge the performance of lithium battery testing equipment? The function of lithium battery testing equipment should be judged from the following points: 1. Test accuracy (e.g. 0.05%FS+0.05%RD, 0.1%FS+0.1%R...
Read More
-
Introduction of Laser Welding Process for Lithium Ion Battery
Aug 27 , 2021
From the manufacture of lithium ion battery cells to battery pack assembly, welding is a very important manufacturing process. The conductivity, strength, air tightness, metal fatigue and corrosion resistance of lithium ion batteries are typical battery welding quality. evaluation standard. The selection of welding methods and welding processes will directly affect the cost, quality, safety and co...
Read More
-
The importance of lithium battery protection board
Sep 18 , 2021
Advantages of lithium ion battery protection board 1. Overcharge protection, guard against damage to the lithium-ion battery pack caused by overcharge. 2. Over-discharge protection to prevent over-discharge from causing deterioration of battery life. 3. Over-current and short-circuit protection is safer and more reliable during the use of lithium-ion batteries. 4. It is small in size and can be ap...
Read More
-
Introduce of pouch cell aluminum-plastic film forming machine
Oct 15 , 2021
The aluminum-plastic film forming machine is an equipment used in the aluminum-plastic film forming of lithium-ion pouch cell. The equipment is driven by a pressurizing cylinder, and the upper and lower molding dies can be made according to customer requirements to realize the molding of aluminum-plastic film shells of lithium-ion batteries of different sizes. An aluminum-plastic film forming mach...
Read More
-
How to calculate the charging and discharging time of lithium battery
Oct 21 , 2021
Generally, the capacity of lithium battery testing equipment is divided into constant current charging, constant voltage charging and constant current discharging in the process of testing lithium ion battery charging and discharging. 1. Constant current charging means that the current is always constant and the voltage slowly rises to the set value (the upper limit voltage of the ternary lithium ...
Read More
-
The production process of Pouch cell lithium battery
Nov 03 , 2021
With the development of science and technology, the technical barriers to battery production have been broken through one by one, and the pouch cell lithium battery has gradually stepped onto the stage, and subsequently entered a large-scale trial stage. The main processes in the production of pouch cell lithium batteries are pole piece, installation and formation. 1. The pole piece process. The m...
Read More
-
What are the steps to use the battery tester?
Nov 19 , 2021
What are the steps to use the battery tester? This question is asked by many customers. And here are the Battery tester is actually a kind of battery testing equipment, mainly used for battery maintenance or testing. The steps to use it are as follows: 1. Connect both the positive and negative poles of the output line, the positive pole of the battery capacity tester and the positive pole of...
Read More
